4.2.6. Setting Speaker Mute
If you want to mute the sound output from the TS-890S speaker during remote operation,
set the speaker mute to "On" in the KNS menu. For the operation method, refer to the
operation manual of the TS-890S.
4.2.7. Configuration for KNS Operation
In the KNS menu of the TS-890S, set KNS operation (LAN connector) to "On (Internet)". For
the operation method, refer to the operation manual of the TS-890S.
4.2.8. Timeout timer settings
During KNS operations, control data signals are transmitted using the network. Consequently,
if normal network operations are disabled for any reason, control of the TS-890S will also be
disabled. Use the following menu to set the functions to stop transmitting automatically after
a fixed period if control should be disabled while transmitting.
KNS Menu
Item
6
VoIP Jitter Buffer
Table 3.6 Setting Speaker Mute
KNS Menu
Item
7
Speaker Mute
Table 4.7 Configuration for KNS Operation
KNS Menu
Item
1
KNS Operation(LAN Connector)
Table 4.8 Timeout timer settings
Menu
Item
6-02
Time-out Timer
24