Siemens Gigaset 2420 System User Manual page 51

3. You can enter, edit, or clear a name. If you want to enter a
new name or edit
an existing name scroll to the
"Enter/Edit Name"
display and press SELECT. Enter the new name using keypad and the BACK key as a backspace key. Names cannot be
longer than 16 characters. Press SELECT. See Chapter 5 Directory and Call Log for more information about text entry.
If you want to clear the name, scroll to the "Clear Name" display and press SELECT. This resets the phone's name to its
generic name.
Call Barring
The Call Barring feature prevents users from calling up to three external numbers. The barred numbers can be from 1 to 8 digits.
When call barring is active, it applies to all external calls no matter how they are dialed. Qnce a barred number is detected, the
call is immediately disconnected.
Note: Call barring does not apply to the Fax/modem port snce the Gigaset 2420 phone does not monitor or control the dialed
numbers from this port.
Enable/Disable Call Barring
To enable or disable Call Barring, scroll to the "Call Barring" display using FWD and press SELECT. A checkmark indicates
that the feature is enabled. Adjust the setting by pressing SELECT.
78
List/Edit a Call Bar Number
To enter or edit a barred number:
1. Scroll to the "List/Edit Call Bar No" display and press SELECT.
You will see the first barred number or EMPTY if there are no entries.
2. Use the FWD and BACK keys to scroll to the desired entry, if necessary. Press
SELECT. Edit the entry using the BACK key as a backspace.
• To prevent long distance calls, enter "1" and "0."
•
To prevent 900 calls, enter "1900."
•
To prevent international calls, enter "011."
•
To prevent directory assistance calls, enter "555."
3. Press SELECT to store your entry or save your changes.
Clearing Call Bar Numbers
To clear barred numbers, scroll to the "Clear Call Bar No."
display. Scroll to the desired entry. Press SELECT and press
SELECT again to clear your entry.
chapter 7
. Customizing Your Sys~em