Destination - HP 54501A Programming Reference Manual

DESTination
DESTination
command/query
The :MEASURE:DESTINATION command specifies the destination to
be used when
a
comparison violation
is
found.
If
a waveform memory
is specified, the memory is
overwritten each time
a
violation
is
found.
The
DESTINATION query returns the destination currently specified.
Note
If WMEMORIES
are
used
as
the destination, the source must be
set
up separately using the
WAVEFORM:SOURCE
command.
Command Syntax:
:MEASure:DESTination
{WMEMory{1
|
2
|
3
| 4} | PMEMory{1 | 2} |
OFF}
Example:
OUTPUT 707;":MEAS:DEST PMEMORY2"
Query Syntax:
:MEASure:DESTination?
Returned Format: [:MEASure:DESTination] {WMEMory{1
| 2 | 3
| 4} |
PMEMory{1
| 2} | OFF}<NL>
Example: DIM Dst$[50]
OUTPUT 707;":MEAS:DEST?"
ENTER
707; Dst$
PRINT Dst$
Measure Subsystem
14-18
HP
54501A
Programming