Table of Contents
Advertisement
P
ROGRAMMING
Programming Feature Keys
Programming
feature keys
Setting your
autodial keys
as feature keys
To reprogram
the key
1-18
F
K
EATURE
EYS
You can program your autodial keys for one-touch feature
access in two ways:
• Using a feature access code
• Using your soft key menu
The procedure used to set your autodial keys as feature
keys using feature access codes is described here. To
program a feature key using your soft key menu, see
"Programming an Autodial Key"
To set your autodial keys as feature keys:
1
Decide which keys you want to program and which
features you want to assign to them.
2
Lift your handset or press <START>.
3
Dial the station speed calling-register access code.
4
Press the autodial key you want to program.
5
Dial the feature access code for
the feature you want stored at this key.
6
Wait for confirmation tone (three short beeps).
To re-program the key, repeat steps 1-5. The new
programming overwrites the old programming.
S
S
ELEC
on page 4-30.
HCXTD860, Rev. A01, September 2001
940A U
G
ET
SER
UIDE
Advertisement
Table of Contents
