Table of Contents
Advertisement
S
S
940A U
ELEC
ET
Programmable Autodial Keys
About
programmable
keys
Key
programming
Displaying
programmed
feature keys
HCXTD860, Rev. A01, September 2001
G
SER
UIDE
The SelecSet 940A console has 24 programmable/autodial
keys. These keys can be programmed to provide one-touch
access to frequently used features, station numbers or
outside phone numbers.
These keys can be programmed in one of three ways:
• By your system administrator at the CMAT
• At your console using feature access codes
• At your console using the <PROG> soft key
See
"Programming Autodial Keys Using FACs"
on page 5-11.
Before using your SelecSet 940A, you should know how
your autodial keys are programmed. Your system
administrator may have programmed some keys.
To display programmed feature keys:
1
Locate and press your <DISPLAY> key.
2
Press a programmable key to determine what feature
is activated for that key. The feature name or speed
dial number is shown on your LCD display.
3
Repeat the procedure for each programmable key.
P
ROGRAMMABLE
A
K
UTODIAL
EYS
1-11
Advertisement
Table of Contents
