P
ROGRAMMABLE
Programmable Features for SelecSet Keys
Programming
features
5-2
F
EATURES FOR
The features listed in
SelecSet 940A. Some of these features can be
programmed from your SelecSet; others must be
programmed from the Customer
Maintenance/Administration Terminal (CMAT). Some of
the features must have feature access codes programmed
for them at the CMAT before they can be activated.
If you cannot activate a feature, check with your
administrator to see if an access code has been assigned.
Some are applicable for general use, others only for
attendant use. The features are marked according to where
they can be programmed and to indicate if they are
attendant-only features.
S
S
K
ELEC
ET
EYS
Table 5-3
HCXTD860, Rev. A01, September 2001
S
S
940A U
ELEC
ET
are available for the
G
SER
UIDE