GE VersaPoint IC220PBI002 User Manual page 86

6
Error Type Error No.
(FS on, # of (FS off, # of
FN pulses) FN pulses)
2 Configuration Errors on Profibus (CHK_CFG telegram) continued
For Error Type 2, Error numbers above 10 are for NIU model IC670PBI002
only.
6-6 VersaPoint™ I/O System Profibus-DP NIU User's Manual – August 2005
Meaning
6 The ID code of the
configured VersaPoint
module does not
correspond with the ID
code of the module in
the station.
7 The length code of the
configured VersaPoint
module does not
correspond to the length
code of the module in
the station.
8 The amount of
manufacturer-specific
data of the special
identification format for
the -VersaPoint module
is faulty. The amount
must be 2, 3 or a
multiple of 2.
9 Not enough output
process data has been
configured within the
identification format for
the VersaPoint module.
10 Not enough input
process data has been
configured within the
identification format for
the VersaPoint module.
11 More than 244 bytes are
required for Profibus
configuration.
12 An internal list is too
short.
13 Not enough output bytes
have been configured for
deactivated modules.
14 Not enough input bytes
have been configured for
deactivated modules.
Remedy
Determine the exact error location
using the device-specific
diagnostics in your control
system.
Determine the exact error location
using the device-specific
diagnostics in your control
system.
Determine the exact error location
using the device-specific
diagnostics in your control
system.
Determine the exact error location
using the device-specific
diagnostics in your control
system.
Determine the exact error location
using the device-specific
diagnostics in your control
system.
Determine the exact error location
using the device-specific
diagnostics of the control system.
Determine the exact error location
using the device-specific
diagnostics of the control system.
GFK-1911B