Configuration Data Convention
The DPV1 data types.
Choices:
▪
Configuration Data of EN 5017
▪
Configuration Data of DPV1
Enabled Alarms
Pull Plug Alarm
When checked, a slot signals the withdrawal of a module or the insertion of
a module.
Process Alarm
When checked, a process alarm signals the occurrence of an event in the
connected process.
Diagnostic Alarm
When checked, a diagnostic alarm signals an event within a slot.
Manufacturer Alarm
When checked, device-specific alarms are enabled.
Status Alarm
When checked, a status alarm signals a change in the state (such as run,
stop, or ready) of a module.
Update Alarm
When checked, an update alarm signals the change of a parameter in a slot,
for example, by a local operation or remote access.
GFK-1911B
Chapter 7 Configuration
7
7-15