Program Mode - Toshiba H7 Operation Manuals

Program Mode

Table 4 lists the menu items of the Program mode and maps the flow of the menu selections. The
Parameter Numbers for the listed functions are provided where applicable. The functions listed may be
accessed (and changed) as mapped below or via the Direct Access method: Program
Applicable Parameter Number.
Primary Menu
Fundamental Parameters
Startup Wizard
Changed from Default
Direct Access
EOI Option Setups
34
Table 4. Program mode mapping.
Program Menu Navigation
Sub Menu
Frequency Setting
Standard Mode Selection
Accel/Decel #1 Settings
Motor Set #1
(See the section titled Startup Wizard Requirements on pg.
(See the section titled Default Setting Changes on pg.
(See the section titled Direct Access Parameter Information on pg.
Contrast (adjustment)
Local/Remote Key
Realtime Clock Setup
Preferences
Parameter Name
Maximum Frequency
Upper Limit
Lower Limit
V/f Pattern
Command Mode
Frequency Mode #1
Frequency Mode #2
Reference Priority Selection
Mode #1/#2 Switching Frequency
Accel #1
Decel #1
Accel/Decel Pattern
Automatic Accel/Decel Enable/Disable
#1 Base Frequency
#1 Max Output Voltage
#1 Torque Boost
#1 Electronic Thermal Protection Level
27.)
26.)
Darker (highlight Darker and press Enter)
Lighter (highlight Lighter and press Enter)
Command
Frequency
Date and time setting (requires RTC option)
Double Click Speed
Arrow Speed
Encoder Speed
Pressed Encoder Action
⇒ Direct Access ⇒
Parameter
Number
F011
F012
F013
F015
F003
F004
F207
F200
F208
F009
F010
F502
F000
F014
F306
F016
F600
N/A
N/A
48.) N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
H7 ASD Operation Manual