Samsung OfficeServ 7070 System Description page 31

Port, LED
LED: AIS
LED: L2
LED: IPC
LED: CLK
LED: SYN
© SAMSUNG Electronics Co., Ltd.
OfficeServ 7070 System Description/Ed.02OfficeServ 7070 System Description/Ed.02
Table 2.10 PRM Board Configuration (Continued)
Indicates whether or not a T1/E1 remote alarm has occurred.
- On: A remote alarm has occurred.
- Off: There has not been a remote alarm.
Indicates the operation status of the Layer 2.
- On: The operation of the PRI Layer 2 is normal.
- Off: The operation of the PRI Layer 2 is abnormal.
Indicates the interoperation status of the upper module.
- On: The interoperation with the BMP is normal.
- Off: The interoperation with the BMP is abnormal.
Indicates the Master/Slave status.
- On: The synchronization clocks are received from the opposite station.
- Off: The synchronization clocks are used as internal clocks.
Indicates the frame synchronization status with the opposite exchanger
- On: The frames are synchronized with the opposite exchanger.
- Off: The frames are unsynchronized with the opposite exchanger.
Description
2-15