Disconnect / Re-Connect Zone Line Input (H5/A2) - Panasonic EBL128 Operating Instructions Manual

Panasonic Eco Solutions Nordic AB
MEW01623
31.2
Action
"Access"
Scroll to menu H8.
"A"
Scroll to menu S2
"A"
Depending on if "0" or
"1" is chosen, one of
the following will be
shown:
E.g. "0"
"0"
"A"
"A"
"Return"
"Return"
"Return"
Rev: -
Disconnect / Re-connect zone line input
(H8/A2)
To avoid damage on the units and EBL128 during physical connection
/ disconnection of units, it is highly recommended to have the zone
line disconnected (disabled), i.e. voltage free (dead).
Text in display
Maintenance
Disconnect / Re-connect COM loop
Disconnect / Re-connect zone line input
Disconnect (=0) or Re-connect (=1) zone
line input? 1
Disconnect zone line input 0 expansion
board 0
Re-connect zone line input 0 expansion
board 0
Zone line input 0 expansion board 0
disconnected
Disconnect zone line input 0 expansion
board 0
Disconnect (=0) or Re-connect (=1) zone
line input? 1
Disconnect / Re-connect zone line input
Maintenance
EBL128 Operating Instructions V2.0.x
ACCEPT? H8
ACCEPT? S1
ACCEPT? S2
ACCEPT?
ACCEPT?
ACCEPT?
ACCEPT?
ACCEPT?
ACCEPT? S2
ACCEPT? H8
127
Comments
According to chapter
"Access", see page 81.
Press "0" or "1" and press
"A" to accept.
Write the 4580 board no.
(0-3) and the zone line
input no. (0-7). Press "A"
to accept.
Do more disconnections or
press "Return".
Write "0" or "1" and press
"A" to accept or press
"Return" menu S2.
Scroll or press "Return" to
H8.
Scroll or press "Return".