Sony CM-B1200 Operating Instructions Manual page 75

Activating phone services (OTASP) [F77]
You can use the OTASP (Over-The-Air Service Provisioning) activation
feature to self-activate your phone with a new service. Contact your
service provider to see if this service is available in your area.
1
Turn to select "Activation"
from the Network menu, then
push .
The Activation menu appears.
2
Turn to select which system block to
activate the service on, then push
The following display appears,
prompting you for confirmation. To go
back one step, press
activation and return to the standby
display, press
3
Press to confirm.
1
The phone calls up a service provider.
When a service provider is contacted, the
following display appears, and you are
connected to an operator. When
activation is complete, the confirmation
display appears followed by the standby
display.
If activation fails
The following display appears. Push
or press to return to the standby display.
END
B2200 56-76draft3
. To cancel
CLR
.
END
to retry,
75
F77
ACTIVATION
on Block A
:Choices
:To Set
.
F77
Attempt to
activate
Block A?
1:Yes
F77
Searching...
Activation
<star code>
Time: 0:01
Activation
<star code>
Time: 4:20
Activation
has failed
:Retry
75
8/21/98, 12:14 PM