Adjusting Network Settings - Sony CM-B1200 Operating Instructions Manual

Adjusting network settings

On the Network menu, you can set the phone to
alert you when the roaming status changes, when
a call is dropped, or when enhanced voice privacy
is lost. You can set how NAM's (Number
Assignment Modules) are switched, and also
activate new services. NAM's are phone identifier
numbers associated specifically with your phone.
For example, you may have both a business phone
number and also a personal phone number
associated with your phone.
Setting the phone's mode [F71]
You can determine whether your dual-band phone switches to analog
mode when you roam off the Network. You have three options:
• Automatic (digital or analog) searches for digital service first, then
analog service if digital could not be found.
• Disabled (digital only).
• Until OFF (analog only until phone is turned off).
1
Push
from the Network menu.
The Set Analog menu appears.
2
Turn
"until OFF", or "automatic".
3
Push
A message appears corresponding to the
mode selected. After a moment, the
"Looking for Service" screen is displayed.
When service has been established, a
service area message is displayed followed by the
standby screen.
70
B2200 56-76draft3
to select "Set Analog"
to select "disabled",
to enter the new setting.
70
F71
NETWORK
Roam Alert
Drop Alert
Priv. Alert
Network menu
F71
NETWORK
Set Analog
Roam Alert
Drop Alert
F71
SET ANALOG
Automatic
:Choices
:To Set
Roaming rate
applies
Digital
Features Off
8/21/98, 12:14 PM