Charging The Battery - Sony CM-B1200 Operating Instructions Manual

Charging the battery

Connect the AC adapter to the phone and the other end to a standard
120V AC outlet as illustrated below. The charging time is about 5 hours.
You can charge the battery pack with the phone turned on, but charging
will take longer.
to an AC outlet
When the power is turned on
The letters "CH" are shown in the upper left
corner of the standby display and
indicates that the battery pack is being charged.
When the battery pack is fully charged, the letters
"FCH" appear instead and
When the power is turned off
The message "Battery is Charging" is displayed
and flashes.
When the battery pack is fully charged, the
message "Charging is Complete" is displayed and
stops flashing.
Notes
• If you make or receive a call when the battery pack is not charged
sufficiently, the call will be cut off. In that case, you will hear an alarm,
indicating that the battery is low.
• You can turn on the phone without the battery pack, but you cannot make
or receive a call, even if you connect the AC adapter to an AC outlet.
16
B2200 10-20draft3
display
to the connector on the phone
(thumb indent faces upwards)
flashes. This
stops flashing.
16
CH
----SONY----
12:34P 12/25
:Saved #s
:Features
v
FCH
----SONY----
12:34P 12/25
:Saved #s
:Features
Battery is
Charging
Power is OFF
Charging is
Complete
Power is OFF
8/21/98, 12:12 PM