4
Parts Replacement and Cleaning Procedure > Main Units (DADF) > Removing the Feed Unit
Main Units (DADF)
Removing the Feed Unit
CAUTION:
When install DADF to a host machine after exchange work, adjustment of eight items is
need.
1) Remove the DADF from the host machine.
2) Open the feeder cover.
3) Remove the front
cover."Removing the Front Cover"(page 4-18).
4) Remove the feeder
cover."Removing the Feeder Cover"(page 4-19).
5) Remove the tray holder.
- Screw 1 pc.
x1
4
Parts Replacement and Cleaning Procedure > Main Units (DADF) > Removing the Feed Unit
F-4-41
6) Unload the cable harness from the cable guide.
- Connector 3 pcs
- Screw 1 pc
x1
x3
7) Remove the rear
cover."Removing the Rear Cover"(page 4-18).
8) Disconnect the nine connectors from the ADF driver PCB.
x9
9) Remove the document tray.
- Connector 1 pc
- Screw 1 pc
x1
x1
4-20
F-4-42
F-4-43
F-4-44
4-20