35) Connect the cable of the ADF
36) Attach the covers of the host machine removed in previous steps.
• Controller cover (no screw)
• Rear cover (4 Screws (RS-tight, M3×8) )(Tighten the screws in the following order: upper
left, lower left, upper right, and then lower right.)
37) Follow the this installation procedure to install the "Image Reader Unit-H1", and then
install from the "Installing the Toner Cartridge".
6
Installation > Installation Procedure > Installation Procedure
6
Installation > Installation Procedure > Installation Procedure
6-14
6-14