Removing The Reader Controller Pcb - Canon H1 Service Manual

4
Parts Replacement and Cleaning Procedure > Original Exposure System (Reader) > Removing the Reader Controller PCB
4-2) Dry-clean the mirror No. 5 with the cleaning tool.
4 Parts Replacement and Cleaning Procedure > Original Exposure System (Reader) > Removing the Reader Controller PCB

Removing the Reader Controller PCB

NOTE:
The reader controller PCB does not memorize a reader-related service mode.
Therefore the measures after replacing the PCB are not necessary.
<Procedure>
1) Remove the reader rear cover.
2) Remove the reader controller PCB.
• 3 flexible cables
• 4 connectors
• 6 screws
F-4-21
x6
x7
4-11
F-4-22
4-11