2
Technology > Basic Configuration (DADF) > Drive Configuration
Basic Configuration (DADF)
Component Configuration
■ Outline of Electric Circuits
Electric circuits of this machine are controlled by the main controller PCB2. The main
controller PCB2 detect the input signals from sensors to output the signals that
drive DC loads such as motors, solenoids, clutches, and fans at the predetermined timings.
The ADF driver PCB does not have a memory area; data such as the data used in the service
mode is stored in CCD unit (CCD PCB).
ADF driver PCB
Reader controller PCB
2
Technology > Basic Configuration (DADF) > Drive Configuration
Clutch
Fan
Motor
Sensor
Solenoid
Main controller
PCB2
F-2-24
Drive Configuration
M1
CL2
CL1
M2
No
Part name
M1
ADF motor
Feeds documents.
M2
Release motor
Prevents a document from swaying.
SL1
Pressurization solenoid
Shifts the delivery lower roller after reversal of the
dualsided document, etc.
SL2
Stamp solenoid
Drives the stamp mechanism.
CL1
Pickup clutch
Drives the pickup clutch to transmit the power of the
pickup/feed motor to the pickup roller unit.
CL2
Registration clutch
Drives the registration clutch to transmit the power of
the pickup/feed motor to the registration roller.
2-15
F-2-25
Content
T-2-8
2-15