Dmp Compact Module 8O (6Fc5111-0Ca03-0Aa2) - Siemens SINUMERIK 810DE powerline Equipment Manual

8.3

DMP compact module 8O (6FC5111-0CA03-0AA2)

The DMP compact module 8O is an encapsulated module. It can be plugged
into a slot of the NCU terminal block as a plug-in module.
Status
LEDs
Labeling
strips
Fixing
screw
Fig. 8-3
S
Interfaces
S
S
Display elements
8 LEDs as a status display for the logical states of the outputs. As from product
version B, the LEDs go out when the load voltage fails.
LEDs lit:
Copyright © Siemens AG 2006
SINUMERIK 810D Equipment Manual Configuration CCU (PHC) – 03/2006 Edition
8.3 DMP compact module 8O (6FC5111-0CA03-0AA2)
X3
0
.
.
7
X2
Outputs
OUT 0 ... OUT 3
M = GND
Front view and side view of a DMP compact module 8A
Terminal P M 7/3
(GND)
X3 24 V 0 V OUT 7
X2 24 V 0 V OUT 3
A 30-pole connector X1 for connection to the NCU terminal block.
6-way terminals X3 and X2 (Phoenix, type MSTB2.5/6-ST-5.08 GRAY, order
no. for X3:18 28 647 and for X2: 18 28 168) for connecting the 8 outputs and
the load power supply.
The terminals are pluggable and can be mechanically coded by the
customer.
Output on
8 DMP Compact Modules
24 V DC 2.5
LOAD
0V
X3 P M 7 6 5 4
X1
X2 0 1 2 3 M P
0V
24 V DC 2.5
LOAD
6/2 5/1 4/0
OUT 6 OUT 5 OUT 4
OUT 2 OUT 1 OUT 0
Outputs
OUT 7 ... OUT 4
8-101