User Guide: PTP 800 Licensed Ethernet Microwave
Figure 7-6 Erase Configuration dialog
Zeroizing security parameters
Perform this task when the CMU is in recovery mode. The purpose of this task is to
zeroize the critical security parameters of the CMU.
Before starting this task, check that the Recovery Options page is displayed
7-2).
To erase the critical security parameters of the CMU, proceed as follows:
Procedure 7-6 Zeroize CMU security parameters in recovery mode
1
Select Zeroize Critical Security Parameters. The Zeroize Security
Parameters dialog is displayed
2
Select OK. The Recovery Options page is redisplayed with a message
indicating that the security parameters have been zeroized.
3
Select Reboot. The Reboot Confirmation dialog is displayed
Select OK. The reboot progress message is displayed. On completion, the
4
CMU restarts.
Figure 7-7 Zeroize Security Parameters dialog
phn-1478_005v000
Apr 2010
(Figure
7-7).
Recovering the CMU
(Figure
(Figure
6-14).
7-19