Chapter 5
General Settings
5.7
RAID Configuration Settings
A confirmation screen appears.
4
Click the [OK] button.
The volume is created and the registration completion screen appears.
5
Click the [Done] button.
The screen display returns to the [Volume] screen.
5.7.4
Copy Data Destination Volume (SDPV) Creation
Create a copy data destination volume in the backup RAID group.
Create a volume as an expansion area of SDV in the backup RAID group "RG1" created in
Creation" (page
Figure 5.10 Copy Data Destination Volume (SDPV) Creation
Backup RAID group (RG1)
3.84TB
3.84TB
3.84TB
RAID5 (4+1)
74).
3.84TB
3.84TB
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
Copy data destination volume
500GB
sdpv
(Snap Data Pool Volume)
80
"5.7.1 RAID Group
P3AG-1832-04ENZ0