Chapter 9
Advanced Copy Settings
9.2
Performing a Copy (SnapOPC+)
6
Select the radio button of the volume that is to be used, and then click the [OK] button.
Select the "No.: 1, Name: sdv0" volume.
7
Check the displayed information, and then click the [Start] button.
8
In the confirmation screen, click the [OK] button.
The SnapOPC+ session starts.
9
Click the [Done] button to return to the [Advanced Copy] screen.
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
148
P3AG-1832-04ENZ0