Chapter 5
General Settings
5.3
ETERNUS Web GUI Startup
When communication cannot be established even after the RMT port of Controller 0 (CM#0) is con-
nected to the LAN port of the PC terminal, make sure that the MASTER LED of Controller 0 (CM#0) is
turned on. When the MASTER LED of Controller 1 (CM#1) is turned on, use the RMT port of Controller
1 (CM#1).
5.3
ETERNUS Web GUI Startup
Start up ETERNUS Web GUI via the Web browser of the connected terminal.
If the settings of the Web browser are incorrect, ETERNUS Web GUI may not be connected. For details on
these settings, refer to "Configuration Guide (Web GUI)".
1
Open the Web browser on the terminal.
2
Enter the following URL in the address bar of the Web browser:
http://192.168.1.1/
The login screen for ETERNUS Web GUI appears.
3
To change the language, click the [Option] button and select [English] or [Japanese] in [Language:].
4
Enter the User ID and Password.
User ID: root
Password: root (by default)
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Configuration Guide (Basic)
Copyright 2017 FUJITSU LIMITED
62
P3AG-1832-04ENZ0