Cleaning - Silvercrest SSB 1000 A1 Operating Instructions Manual

A connected device cannot be charged via the USB output.
♦ The device is not plugged into the power socket. Plug the device
into a power socket.
♦ No connection to the device. Check the connection.
♦ The charging current of the connected device is too high
(> 800 mA).
NOTE
► If you cannot solve the problem with the above-mentioned solu-
tions, please contact the Service Hotline (see section Service) .

Cleaning

CAUTION
► To avoid irreparable damage to the device, ensure that no mois-
ture penetrates it during cleaning.
► Do not use caustic, abrasive or solvent-based cleaning materials.
These can damage the surfaces of the device.
♦ Clean the housing of the device with a lightly moistened cloth
and a mild detergent only.
SSB 1000 A1
GB │ IE │ NI │
19 ■