Maintenance Measures; Maintenance - Miele PG 8581 Operating Instructions Manual

Maintenance

Periodic checks must be carried out by Miele Technical Service after
1000 operating hours or every 18 months at the latest.
Maintenance covers the following:
– Electrical safety according to national regulations
– Door mechanism and door seal
– Any screw connections and connectors in the wash cabinet
– Water inlet and drainage
– Internal and external dispensing systems
– Spray arms
– Filter combination
– Sump including drain pump and non-return valve
– All mobile units, baskets, modules and inserts
– Steam condenser
– Wash pressure sensor
If there is a communication module:
– Connected printer
– Network connection
External documentation software and the computer network will
not be tested by Miele.
The following operational tests will be carried out within the
framework of the maintenance:
– A program will be run as a test run
– Seals will be tested for water tightness
– All relevant measuring systems will be safety tested, including fault
displays
– Safety features

Maintenance measures

97