Preparing The Load - Miele PG 8581 Operating Instructions Manual

Preparing the load

 Only items which have been declared by their manufacturer as
suitable for machine reprocessing may be processed. The
manufacturer's specific reprocessing instructions must be
observed.
Processing of disposable items is not allowed.
Special injector nozzles, irrigation sleeves or adapters may be
required for appropriate internal cleaning, depending on the load.
These, together with other accessories, are available from Miele.
Protective measures for personal safety must be observed.
Wear protective gloves when handling contaminated loads or use
appropriate tools, e.g. tweezers.
– Arrange the load so that water can access all surfaces. This
ensures that it gets properly cleaned.
– Do not place items to be cleaned inside other pieces where they
may be concealed. Do not place items so close together that
cleaning is hampered!
– Hollow items must be thoroughly cleaned, internally and externally.
– Ensure that items with long narrow hollow sections can be flushed
through properly before placing them in a fitting or when
connecting them to a water connection.
– Hollow vessels should be inverted and placed in the correct mobile
units, baskets, modules and inserts to ensure that water can flow in
and out of them unrestricted.
– Deep-sided items should be placed at an angle to make sure water
runs off them freely.
– Take apart any items which can be dismantled according to the
manufacturer's instructions and process the individual parts
separately from each other.
– Lightweight items should be secured with a cover net (e.g. A 6 or
A 810) and small items placed in a mesh tray to prevent them
blocking the spray arms.
– The spray arms must not be blocked by items which are too tall or
which hang down in their path.
– Broken glass can result in serious injury when loading or unloading.
Broken glass items must not be processed in the machine.
– Nickel and chrome plated items and items made of aluminum
require special procedures and are not generally suitable for
machine reprocessing.
– It is advisable to use only instruments made of special application
steel which are not susceptible to corrosion.
Application technology
37