Toshiba TOSVERT VF-AS3 Instruction Manual page 114

RS485 communication
(connector 2)
Communication option
(5) The remaining capacity of the battery (
(6) The current time ("hour/minute") is displayed.
(7) Current display mode
3
[Standard mode] is displayed.
(8) Normally, the output frequency (default setting) is displayed. Set the display contents with
<F710: Standard mode display>. For details, refer to [5. 4. 3].
When an alarm or trip occurs, its contents are displayed.
(9) When an alarm or trip occurs, the name of the alarm and a message are also displayed here.
(10) The functions assigned to the [F1] - [F4] keys are displayed.
For details, refer to [3. 1. 1].
Memo
■ Screen display of [Setting mode]
9
This is a display mode to set parameters.
(1)
(2)
1. History function
2. Direct access
3. Guidance function
(3)
4. Basic parameters
5. Extended parameters(F - - -)
Top
(4)
(1) From the operation status to the current time, this mode has the same display as [Standard
mode].
(2) The current display mode [Setting mode] is displayed.
(3) The setting items are displayed. One screen can display up to five items.
Select an item with the touch wheel and press the [OK] key. Then the setting screen is displayed.
<Setting screen of basic parameter>
"Left end": Title
"Middle": Parameter name
"Right end": Setting value
3. [Basic operation] Operation panel and screen display
Run command from
• When emergency off, alarm, or trip has occurred, refer to [3. 2] and [Chapter 13].
STOP 0.0Hz
Setting Mode
Easy
Top screen of [Setting mode]
Icon
yes/ no) is displayed with icons.
STOP
17:13
: Application easy setting
AUA
: Eco-standby power setting
AUE
: Multi-rating select
AUL
: Automatic Acc/Dec
AU1
: Torque boost macro
AU2
Monitor
Top
Setting screen of basic parameters
3-10
E6582062
Run / Stop
Stop
Run
Stop
Run
0.0Hz
17:13
Basic parameters
0
0
0
0
0