Fujitsu ETERNUS CS800 S6 User Manual page 296

When entering IP addresses, never use an address that is in a reserved IP
address range. To see a list of reserved IP address ranges, click the quick tip icon
[?] located near the IP address field.
Hostname
Default Gateway
DNS Suffix Search List
Primary, Secondary, and
Tertiary DNS IP Address
The DNS Suffix Search List and DNS IP Addresses cannot be modified if the
ETERNUS CS800 is currently joined to a Windows domain. To disjoin a Windows
domain, see
ETERNUS CS800
The hostname of the ETERNUS CS800.
The Hostname cannot be blank and must contain only
letters
[ A–Z, a–z ], numbers [ 0–9 ], and hyphens [ - ].
The default gateway IP address.
Specifying a default gateway is optional if all access is
local to a particular subnet. For example, if the ETERNUS
CS800 and all of its clients are on the same subnet, you
do not need to specify a default gateway.
CAUTION!
Specifying a default gateway is required to enable
connectivity with all subnets other than those that
the ETERNUS CS800 is directly connected to. For
example, if the ETERNUS CS800 and its clients are on
different subnets, or you are using an external NTP
server, you must specify a default gateway.
(Optional) The domain list to search when resolving
domain names.
The list may be either a single domain name or a
comma-separated list of up to 6 domain names. The first
domain name listed is used as the local domain. Domain
names must contain only letters [ A–Z, a–z ], numbers [
0–9 ], dots [ . ], and hyphens [ - ].
(Optional) The IP addresses of up to three DNS servers
used to resolve domain names and translate them into IP
addresses.
You must specify a DNS IP address if you plan to use
hostname format when configuring an NTP time
server, outgoing e-mail server, replication sources
and targets, and other information.
"Disjoining a Workgroup or Domain" on page 197.
10.9 System
296