Fujitsu ETERNUS CS800 S6 User Manual page 212

Figure 152: Media Add Page
To add virtual tape cartridges to a partition:
1. In the Partition drop-down box, select the partition where the media will be created.
2. Under Add Contiguous Media, enter information about the media:
Initial Location
Number of Media
ETERNUS CS800
The initial location for cartridges after they are
created (Storage Slot or I/E Slot).
If you are editing a partition, only the Library
Model, Number of Storage Slots, and Number
of Virtual Tape Drives options can be changed.
The number of cartridges to create in the partition.
10.3 VTL Configuration
212