HP 12500 Series Command Reference Manual page 139

Parameters
interface interface-type interface-number: Specifies a port by its type and number.
Usage guidelines
If no port is specified, this command displays the types of advertisable optional TLVs of all ports.
Examples
# Display the types of advertisable optional LLDP TLVs of interface GigabitEthernet 3/0/1.
<Sysname> display lldp tlv-config interface GigabitEthernet 3/0/1
LLDP tlv-config of port 1[GigabitEthernet3/0/1]:
NAME
Basic optional TLV:
Port Description TLV
System Name TLV
System Description TLV
System Capabilities TLV
Management Address TLV
IEEE 802.1 extend TLV:
Port VLAN ID TLV
Port And Protocol VLAN ID TLV
VLAN Name TLV
DCBX TLV
IEEE 802.3 extend TLV:
MAC-Physic TLV
Power via MDI TLV
Link Aggregation TLV
Maximum Frame Size TLV
LLDP-MED extend TLV:
Capabilities TLV
Network Policy TLV
Location Identification TLV
Extended Power via MDI TLV
Inventory TLV
Table 32 Command output
Field
LLDP tlv-config of port 1
NAME
STATUS
DEFAULT
Basic optional TLV
STATUS DEFAULT
YES YES
YES YES
YES YES
YES YES
YES YES
YES YES
NO NO
NO NO
NO NO
YES YES
YES YES
YES YES
YES YES
YES YES
YES YES
NO NO
YES YES
YES YES
Description
Advertisable optional TLVs of port 1.
TLV type.
Indicates whether a specific type of TLV is sent through a port.
Indicates whether a specific type of TLV is sent through a port by
default.
Basic TLVs:
• Port description TLV.
•
System name TLV.
•
System description TLV.
•
System capabilities TLV.
• Management address TLV.
134