HP 12500 Series Command Reference Manual page 132
Routing, layer 2 - lan switching
Hide thumbs
Also See for 12500 Series:
- Configuration manual (402 pages) ,
- Network management and monitoring command reference (320 pages) ,
- Command reference manual (157 pages)
Table of Contents
Advertisement
Field
System capabilities supported
System capabilities enabled
Management address OID
Port and protocol VLAN ID(PPVID)
Port and protocol VLAN supported
Port and protocol VLAN enabled
VLAN name of VLAN 12
Oper version
Sequence number
Acknowledge number
DCBX ETS subTLV info
Percentage
DCBX PFC subTLV info
P0-0 P1-0 P2-1 P3-1 P4-0 P5-0
P6-0 P7-0
Number of traffic classes supported
Description
Capabilities supported on the neighboring device:
•
Repeater—Signal repeating is supported.
•
Bridge—Switching is supported.
•
WlanAccessPoint—The neighboring device can serve as a
wireless access point.
•
Router—Routing is supported.
•
Telephone—The neighboring device can serve as a telephone.
•
DocsisCableDevice—The neighboring device can serve as a
DOCSIS-compliant cable device.
•
StationOnly—The neighboring device can serve as a station
only.
•
Other—Functions other than those listed above are supported.
Capabilities enabled on the neighboring device:
•
Repeater—Signal repeating is enabled.
•
Bridge—Switching is enabled.
•
WlanAccessPoint—The neighboring device is serving as a
wireless access point.
•
Router—Routing is enabled.
•
Telephone—The neighboring device is serving as a telephone.
•
DocsisCableDevice—The neighboring device is serving as a
DOCSIS-compliant cable device.
•
StationOnly—The neighboring device is serving as a station
only.
•
Other—Functions other than those listed above are supported.
Management address object ID.
Port protocol VLAN ID.
Indicates whether protocol VLAN is supported on the port.
Indicates whether protocol VLAN is enabled on the port.
Name of VLAN 12.
DCBX version number.
Number of DCBX TLV content changes.
Times of synchronizing configurations by the peer device.
CoS-to-local priority mapping and bandwidth allocation.
Percentage of bandwidth allocated.
Indicates whether PFC is enabled.
Indicates whether PFC is enabled for each 802.1p priority on the
local end:
•
1—Enabled.
•
0—Disabled.
Capability set supported by PFC (displayed only in Rev 1.01).
127
Advertisement
Table of Contents
