Nest Top-Most - HP 12500 Series Command Reference Manual

Dot1p
Outer VLAN
Inner VLAN
Table 27 Command output
Field
Interface
Action
Dot1p
Outer VLAN
Inner VLAN

nest top-most

Use nest top-most to configure a VLAN tag adding action to a traffic behavior.
Use undo nest top-most to restore the default.
Syntax
nest top-most vlan vlan-id
undo nest top-most
Default
No VLAN tag adding action is configured.
Views
Traffic behavior view
Predefined user roles
network-admin
mdc-admin
Parameters
vlan-id vlan-id: Specifies the ID of the VLAN tag to be added. The value range for the vlan-id
argument is 1 to 4094.
Usage guidelines
If a QoS policy contains a VLAN tag adding action, apply it only to the incoming traffic of an
interface.
If the traffic behavior already contains a VLAN tag adding action, the new one overwrites the old
one.
Examples
# Configure traffic behavior b1 to add VLAN tag 123.
<Sysname> system-view
[Sysname] traffic behavior b1
: Inner
: 100
: 2
Description
Name of the interface with VLAN mapping enabled.
The action type is Nest, which indicates the action of adding VLAN
tags to packets.
802.1p priority in the outer VLAN tag of packets. This field displays
Inner if the 802.1p priority value in the outer VLAN tag of packets is
the same as that in the inner VLAN tag.
Outer VLAN ID of packets.
Inner VLAN ID of packets.
119