HP 12500 Series Command Reference Manual page 105

Examples
# Display VLAN 2 information.
<Sysname> display vlan 2
VLAN ID: 2
VLAN type: Static
Route interface: Not configured
Description: VLAN 0002
Name: VLAN 0002
Tagged ports:
Untagged ports:
GigabitEthernet3/0/1
# Display VLAN 3 information.
<Sysname> display vlan 3
VLAN ID: 3
VLAN type: static
Route interface: Configured
IP address: 1.1.1.1
Subnet mask: 255.255.255.0
Description: VLAN 0003
Name: VLAN 0003
Tagged ports:
Untagged ports: None
Table 23 Command output
Field
VLAN type
Route interface
Description
Name
IP address
Subnet mask
Tagged ports
Untagged ports
Related commands
vlan
None
GigabitEthernet3/0/2
None
Description
VLAN type, static or dynamic.
Indicates whether the VLAN interface is configured.
•
•
Description of the VLAN.
Name configured for the VLAN.
Primary IP address of the VLAN interface (available only when an
IP address is configured for the VLAN interface). To display
secondary IP addresses, use the display interface vlan-interface
command in any view or the display this command in VLAN
interface view.
Subnet mask of the primary IP address (available only when an
IP address is configured for the VLAN interface).
Ports through which VLAN packets are sent tagged.
Ports through which VLAN packets are sent untagged.
GigabitEthernet3/0/3
Not configured.
Configured.
100