Touch Operation - Siemens SINUMERIK 840D sl Operating Manual

Introduction
2.4 User interface
Program editor
Additional functions are available in the editor
● Undo the last change
Undo Ctrl+Z
● Redo the changes that were undone
Redo Ctrl+Y
Up to 50 changes can be undone.
2.4.10

Touch operation

If you have an operator panel with a touch screen, you can perform the following functions
with touch operation:
Operating area switchover
Channel switchover
Cancelling alarms
Calling up the online help
50
You can display the operating area menu by touching the display symbol
for the active operating area in the status display.
You can switch over to the next channel by touching the channel display
in the status display.
Touch operation of the Alarm Cancel icon will cancel the displayed alarm.
Touch operation of the information icon in the status display will open the
online help.
Operating Manual, 05/2017, A5E40868721
Turning