Selecting A Tool - Siemens SINUMERIK 840D sl Operating Manual

Hide thumbs Also See for SINUMERIK 840D sl:

Table of Contents

Selecting a tool

Operating Manual, 05/2017, A5E40868721

Select the "JOG" operating mode.

Press the "T, S, M" softkey.

Select as to whether you wish that the tool is identified using a name or

the location number.

Enter the name or the number of the tool T in the entry field.

Press the "Select tool" softkey.

The tool selection window is opened.

Place the cursor on the desired tool and press the "OK" softkey.

The tool is transferred to the "T, S, M... window" and displayed in the field

of tool parameter "T".

Select the tool cutting edge D or enter the number directly in the field.

Select the sister tool ST or enter the number directly in field "ST".

Press the <CYCLE START> key.

The tool is automatically swung into the machining position and the name

of the tool displayed in the tool status bar.

Working in manual mode

5.2 Selecting a tool and spindle

Show Quick Links

Table of Contents

Sinumerik 828d