Default Settings For Manual Mode - Siemens SINUMERIK 840D sl Operating Manual

Working in manual mode

5.8 Default settings for manual mode

5.8 Default settings for manual mode
Specify the configurations for the manual mode in the "Settings for manual operation" window.
Default settings
Settings
Type of feedrate
Setup feedrate G94
Setup feedrate G95
Variable increment
Spindle speed
Procedure
118
Press the "Teach-in counterspindle" softkey if you are working at the
counterspindle.
Note:
The thread synchronization is activated by teaching in a spindle. In this
case, the synchronizing positions of axes X and Z and the synchronizing
angle of spindle (Sn) are saved in the Machine and displayed in the
screen form.
The selection boxes for main spindle and counterspindle indicate whether
thread synchronization is active for the particular spindle (yes = active /
no = not active).
5. Now carry out the "thread turning" machining step.
6. For the main spindle or counterspindle, select the "no" entry to deactivate
thread synchronization.
Meaning
Here, you select the type of feedrate.
● G94: Axis feedrate/linear feedrate
● G95: Revolutional feedrate
Enter the desired feedrate in mm/min.
Enter the desired feedrate in mm/rev.
For variable increments, enter the desired increment when traversing axes.
Here, enter the desired spindle speed in rpm.
1. Select the "Machine" operating area.
2. Press the <JOG> key.
3. Press the menu forward key and the "Settings" softkey.
The "Settings for manual operation" window is opened.
Operating Manual, 05/2017, A5E40868721
Turning