HP FlexFabric 12500 Command Reference Manual page 132

network-operator
mdc-admin
mdc-operator
Parameters
xconnect-group group-name: Displays PW information for the cross-connect group specified by its name,
a case-sensitive string of 1 to 31 characters. If no group is specified, the command displays L2VPN PW
information for all cross-connect groups.
protocol: Displays L2VPN PW information established by a specific protocol. If no protocol is specified,
the command displays L2VPN PW information established by all protocols.
bgp: Displays BGP PW information. This keyword is not supported in the current software version, and
is reserved for future support.
ldp: Displays LDP PW information.
static: Displays static PW information.
verbose: Displays detailed information. Without this keyword, the command displays brief information.
Usage guidelines
Without ldp and static, this command displays both LDP PW and static PW information.
Examples
# Display all PW information.
<Sysname> display l2vpn pw
Flags: M - main, B - backup, H - hub link, S - spoke link, N - no split horizon
Total number of PWs: 2, 2 up, 0 blocked, 0 down, 0 defect
Xconnect-group Name: ldp
Peer
192.3.3.3
Table 40 Command output
Field
Flag
PW ID/Rmt Site
Proto
Link ID
State
# Display detailed information about all PWs.
<Sysname> display l2vpn pw verbose
Xconnect-group Name: ldp
Connection Name: ldp
PW ID/Rmt Site In/Out Label
1000 65663/65662
Description
PW flag:
•
M—Primary PW.
•
B—Backup PW.
PW ID.
Protocol that established the PW, LDP or Static.
Link ID of the PW.
PW state: Up, Down, Blocked, or Defect.
Blocked indicates that the PW is a backup PW. Defect indicates BFD has detected
a defect on the PW.
Proto
LDP
127
Flag Link ID State
M 0 Up