Connection - HP FlexFabric 12500 Command Reference Manual

Examples
# Configure service instance 200 on the Layer 2 interface GigabitEthernet 3/0/1 to match packets with
an outer VLAN tag of 200, and bind the service instance to the cross-connect actopw in the cross-connect
group vpn1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 3/0/1
[Sysname-GigabitEthernet3/0/1] service-instance 200
[Sysname-GigabitEthernet3/0/1-srv200] encapsulation s-vid 200
[Sysname-GigabitEthernet3/0/1-srv200] quit
[Sysname-GigabitEthernet3/0/1] quit
[Sysname] xconnect-group vpn1
[Sysname-xcg-vpn1] connection actopw
[Sysname-xcg-vpn1-actopw] ac interface GigabitEthernet 3/0/1 service-instance 200
Related commands
•

connection

display l2vpn interface
•
• display l2vpn service-instance
encapsulation
•
pw-type
•
connection
Use connection to create a cross-connect and enter cross-connect view. If the specified cross-connect has
been created, the command places you into cross-connect view.
Use undo connection to remove a cross-connect.
Syntax
connection connection-name
undo connection connection-name
Default
No cross-connect is created.
Views
Cross-connect group view
Predefined user roles
network-admin
mdc-admin
Parameters
connection-name: Specifies the name of the cross-connect, a case-sensitive string of 1 to 20 characters,
excluding hyphens.
Usage guidelines
A cross-connect is a point-to-point connection. You can perform the following operations in cross-connect
view:
119