Connect A Wireless Client To Your Router; Wps Button - D-Link COVR-2600R User Manual

Section 5- Connecting a Wireless Client

Connect a Wireless Client to your Router

The easiest and most secure way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most
wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS
button (or a software utility with WPS) that you can press to connect to the COVR-2600R router. Please refer to your user
manual for the wireless device you want to connect to make sure you understand how to enable WPS. After your device's
manual, follow the steps below:
Step 1 - Press the WPS button on the COVR-2600R for about 1 second. The LED on the front will start to blink.
Step 2 - Within 2 minutes, press the WPS button on your wireless device (or launch the software utility and start the WPS
process).
Step 3 - Allow up to 1 minute for your connection to be configured. Once the Internet light stops blinking, you will be
connected and your wireless connection will be encrypted with WPA2.
D-Link COVR-3902 User Manual

WPS Button

WPS Button
126