Table of Contents
Advertisement
Section 4 - Quick VPN
Quick VPN Server Setup Instructions
Configure the following options:
L2TP over IPsec:
Enable or disable the Quick VPN server.
If L2TP over IPsec is enabled, the following options are available:
Username:
Enter a username between 1 and 20 characters.
Password:
Enter a username between 1 and 20 characters.
PSK:
Enter a passkey between 6 and 64 characters.
Save
Click this button to save the current Quick VPN settings to your local
Configuration To
hard drive.
Local Hard Drive:
For Apple iOS devices and OS X: From a computer browser click
this button to export a profile to simplify setup. E-mail this file as an
attachment to your Apple mobile device or open the file in OS X.
Advanced Settings - Address Autoconfiguration Settings
Choose the authentication protocol type: MSCHAPv2, PAP, or CHAP.
Authentication
Protocol:
MSCHAPv2 is the default.
MPPE:
Select the encryption cipher strength: None, RC4-40, or RC4-128.
RC4-128 is the default.
Click Save when you are done.
When you are done configuring VPN settings, refer to the following sections for more
information on how to set up VPN clients.
D-Link COVR-3902 User Manual
101
Hide quick links:
Advertisement
Table of Contents
