D-Link COVR-2600R User Manual page 30

Section 2 - Installation
Setup Wizard (continued)
Step 4
A message will appear to confirm the Covr Extender was successfully detected
and synced to the Covr Router. Click Next to continue.
Step 5
Using an Ethernet cable, connect the yellow port on the back of the Covr Router
labeled INTERNET to your modem. Click Next to continue.
The Covr Router will now detect your Internet connection. If your Internet
connection was successfully auto-detected, continue to the Step 9. If your
connection was not automatically detected, refer to the following steps.
D-Link COVR-3902 User Manual 26