HP 12500 Series Configuration Manual page 50

NOTE:
A shared key configured on the switch must be the same as that configured on the HWTACACS server.
Specifying the VPN to which the servers belong
After you specify a VPN for an HWTACACS scheme, all the authentication, authorization, and
accounting servers specified for the scheme belong to the VPN. However, if you also specify a VPN when
specifying a server for the scheme, the server belongs to the specific VPN.
To specify a VPN for an HWTACACS scheme:
Step
1. Enter system view.
2. Enter HWTACACS scheme view.
3. Specify a VPN for the HWTACACS scheme.
Setting the username format and traffic statistics units
A username is usually in the format of userid@isp-name, where isp-name represents the name of the ISP
domain the user belongs to and is used by the switch to determine which users belong to which ISP
domains. However, some HWTACACS servers cannot recognize usernames that contain an ISP domain
name. In this case, the switch must remove the domain name of each username before sending the
username. You can set the username format on the switch for this purpose.
The switch periodically sends accounting updates to HWTACACS accounting servers to report the traffic
statistics of online users. For normal and accurate traffic statistics, make sure that the unit for data flows
and that for packets on the switch are consistent with those configured on the HWTACACS servers.
To set the username format and the traffic statistics units for an HWTACACS scheme:
Step
1. Enter system view.
2. Enter HWTACACS scheme
view.
3. Set the format of usernames
sent to the HWTACACS
servers.
4. Specify the unit for data flows
or packets sent to the
HWTACACS servers.
Command
system-view
hwtacacs scheme hwtacacs-scheme-name
vpn-instance vpn-instance-name
Command
system-view
hwtacacs scheme
hwtacacs-scheme-name
user-name-format { keep-original |
with-domain | without-domain }
data-flow-format { data { byte |
giga-byte | kilo-byte | mega-byte }
| packet { giga-packet | kilo-packet
| mega-packet | one-packet } }*
40
Remarks
N/A
N/A
Optional.
By default, the ISP domain name
is included in a username.
Optional.
byte for data flows and
one-packet for data packets by
default.