Password Authentication Enabled Stelnet Client Configuration Example - HP 12500 Series Configuration Manual

Figure 78 Specifying the private key file
Click Open to connect to the server.
e.
If the connection is successfully established, the system asks you to enter the username. After
entering the username (client002), you can enter the command-line interface of the server.
Password authentication enabled Stelnet client configuration
example
Network requirements
As shown in
B acts as the Stelnet server and uses password authentication. The username and password of Switch A
are saved on Switch B.
Figure 79 Network diagram
Configuration procedure
Configure the Stelnet server:
1.
# Generate the RSA key pairs.
<SwitchB> system-view
[SwitchB] public-key local create rsa
Figure 79, you can log in to Switch B through the Stelnet client that runs on Switch A. Switch
230