GE 845 Instruction Manual page 159

CHAPTER 4: SETPOINTS
845 TRANSFORMER PROTECTION SYSTEM – INSTRUCTION MANUAL
2. In the "New Report Control Block" window under "Select Report Type", select the radio
button for a buffered or unbuffered report.
3. In the "IEC61850 Clients N#" dropdown list, select 1 or any other available number.
4. Click the "Next" button to proceed with further configuration (else click "Cancel" to
discard the new configuration).
5. In the "Select DataSet" window, select the radio button for "New DataSet" or "Existing
DataSet".
Figure 4-15: Select DataSet Window
Report Properties
The report properties section can be viewed when any configured report available under
GEDevice > 845 is selected.
Figure 4-16: Report Properties Window
All the available parameters of the Report control block are displayed when clicking
"Report Advanced Configuration". Respective OptFields, TrgOps can be configured by
either selecting "True" or "False". Buffer time is given in milliseconds.
Figure 4-17: Advanced Configuration
Configure Dataset Items
1. Select the required logical node under GEDevice > 845 tree.
DEVICE
4–55