Mil Status - Bosch OBD 2220 INFO SCAN User Manual

en | 2 2 | User guide | OBD 2220 Info Scan
Diagnostic Menu
I/M Monitors
Read Codes
Erase Codes

MIL Status

State OBD Check
View Data
Record Data
View Freeze Data
Drive Cycle Monitor
Rd\Er
• Alternately, press and hold the
seconds when
• If diagnostic results and codes are not to be
erased select NO and press
Erase Codes
Are you sure you want to
erase diagnostic results and
codes?
No
Rd\Er
• Selecting NO displays a "Command canceled"
message.
Erase Codes
Command canceled
Press ENTER
Rd\Er
2. Select YES to erase diagnostic results and codes.
• Press .
Erase Codes
Are you sure you want to
erase diagnostic results and
codes?
No
Rd\Er
3. If more than one module is supported, a menu is
displayed.
580000 | REV. A | 04.2017
key for 2
appears on the display.
.
Yes
to continue
Yes
• Use the and
choice is highlighted.
• Press .
Select Module
OBDII/EOBD
Engine
ABS
4. Observe "Command sent" message is displayed.
• Press .
Erase Codes
Command sent
Codes remaining:36
Press ENTER
Rd\Er
5. Return to Diagnostic Menu.
• Press .
5.4 MIL Status
From Diagnostic Menu:
1. Select MIL Status.
• Use the and
highlighted.
• Press .
Diagnostic Menu
I/M Monitors
Read Codes
Erase Codes
MIL Status
State OBD Check
View Data
Record Data
View Freeze Data
Drive Cycle Monitor
Rd\Er
2. View MIL Status.
keys until the desired
to continue
keys until MIL Status is
Bosch Automotive Service Solutions Inc.