GE D90 Plus Communications Manual page 211

CHAPTER 3: DNP COMMUNICATION
Object 50 (time and date)
Object 52 (time delay)
Object 60 (class 0, 1, 2, and 3 data)
PLUS
D90 LINE DISTANCE PROTECTION SYSTEM – COMMUNICATIONS GUIDE
– 06 (no range, or all)
– 07, 08 (limited quantity)
– 17, 28 (index)
The following codes are used for responses.
• Function codes for responses, object 34, variations 1, 2, and 3:
– 129 (response)
• Qualifier codes for responses, object 34, variations 1, 2, and 3:
– 00, 01 (start-stop)
– 17, 28 (index)
Object 50, variation 1: time and date
Variation 1 is used to request the default variation. The following codes are used for
requests.
• Function codes for requests, object 50, variation 1:
– 1 (read)
– 2 (write)
• Qualifier codes for requests, object 50, variation 1:
– 00, 01 (start-stop)
– 06 (no range, or all)
– 07 (limited quantity, quantity = 1)
– 08 (limited quantity)
– 17, 28 (index)
The following codes are used for responses.
• Function codes for responses, object 50, variation 1:
– 129 (response)
• Qualifier codes for responses, object 50, variation 1:
– 00, 01 (start-stop)
– 17, 28 (index)
Object 52, variation 2: time delay fine
There are no codes used for requests.
The following codes are used for responses.
• Function codes for responses, object 52, variation 2:
– 129 (response)
• Qualifier codes for responses, object 52, variation 2:
– 07 (limited quantity, quantity = 1)
Object 60, variation 0: class 0, 1, 2, and 3 data
The following codes are used for requests.
• Function codes for requests, object 60, variation 0:
– 1 (read)
– 20 (enable unsolicited response)
DNP DEVICE PROFILE
207