Setting the LP CLI
Setting the virtual COM
console
Setting authentication
Notes:
1
You can switch pages by pressing the F11 and F12 keys on the System Configuration
.
screen.
Note:
•
HCSM is connected to LPAR manager via a management module. For this
reason, you do not need to change HCSM settings even if you enable user
authentication on LPAR manager.
Initial registration user account
Initial registration account
Notes:
1
If LPAR manager is upgraded from a version that does not support the user
.
authentication functionality, the initial registration user account inherits the user
name and password of the LPAR manager Web system.
Note:
•
For security reasons, we strongly recommend that you create a new
account and delete the initial registration account, or delete the password
of the initial registration account when specifying the initial settings for
LPAR manager.
Setting user accounts
You can register up to 70 accounts. You can use the operations below to
manage user accounts.
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Table 2-15 Web console
Item
Resources > Modules > All Modules > Server Blades >
Server Blades x > LPAR > Edit > Edit LP CLI
Resources > Modules > All Modules > Server Blades >
Server Blades x > LPAR > Edit > Edit virtual COM
console settings
Table 2-16 LPAR manager screen
Item
System Configuration screen
> Authentication
Item
User name
Password
System Operation
Operation
Operation
1
Operation
admin
1
password
2-25