Front Panel - Hitachi Compute Blade 500 Series User Manual

No.
(21)
How to change Sampling time
Since the cursor is already placed on the Sampling time, just press [Enter] to
display a sub-screen. Enter the new number on the sub-screen, and press
[Enter].
How to display specified processor groups
Place the cursor on [Grp] on the upper right, and press [Enter] to display a
sub-screen. Select the number of a processor group shown on the sub-
screen, and press [Enter].

Front Panel

The following actions are possible in the Front Panel screen. Example of Front
Panel screen is below.
7-116
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
Item
Busy(%) = execution time of the LPAR
manager System2 ÷ system service time x
100
System Displays the system service time, the
Total system busy time and the system busy
ratio of the LPAR manager system.
Srv(ms) displays the system service time.
This value is the total service time that the
physical processors running properly have
in the LPAR manager system, and is
obtained by the following formula.
Srv(ms) = the number of physical
processors running properly x 1000ms
Dsp(ms) displays the system busy time.
The system busy time is the sum of the
execution time of all LPARs, SYS1, and
SYS2.
Busy(%) displays the system busy ratio.
This value is the total busy ratio in the
LPAR manager system, and is obtained by
the following formula.
Busy(%) = system busy time ÷ system
service time x 100
Operation by LPAR manager Screen
Description
Supported
Default LPAR
Value manager
Version
--- 01-0X~