I/O Module Pp72/48 - Siemens SINUMERIK 840Di Manual

06.03
2.12

I/O Module PP72/48

2.12.1 Module
X2: PROFIBUS
X1: Power supply
Fig. 2-29 I/O Module PP72/48
Order number
Features
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
LED: POWER
X333
(50-pin ribbon cable connector)
Designation
I/O Module PP72/48
The I/O module PP72/48 is a simple and low-cost module (without a separate
housing) for connecting digital input/outputs as part of an automation system
based on PROFIBUS DP.
The module has the following important features:
S
PROFIBUS DP connection (max. 12 Mbaud), specified by:
PROFIDrive profile drive technology version 3,
Draft V1.4.2, 01. September 00
S
72 digital inputs and 48 digital outputs
S
On-board status display by means of four diagnostic LEDs
To power the module and the digital outputs, an external power supply source
(+24VDC) is required.
2 Hardware Descriptions
2.12 I/O Module PP72/48
S1: DIL switch for setting the
PROFIBUS address
LED: OVTEMP
LED: READY
8
1
ON
OFF
X222
Dig. input/outputs
Order No. (MLFB)
6FC5 611-0CA01-0AA0
LED: EXCHANGE
X111
2-93