Trace Function - Siemens SINUMERIK 840Di Manual

13 Drive Optimization using HMI Advanced

13.6 Trace function

13.6 Trace function
13.6.1 Trace function properties
Function
overview
13-434
The trace function with a graphical user interface serves to record the time
change of data (values, signals, states, etc.) in the servo range and partially in
the range of the drives, too.
You can select measuring signals and set the measuring parameters with soft
keys and drop-down lists.
The function is operated using the mouse or keyboard.
Individual functions of the trace function
S
Four trace buffers with up to 2,048 values each
S
Selection of SERVO and drive signals (in position control cycle)
S
Trace/trigger signals can be set using absolute address and value masking
S
Different trigger conditions to start recording
(triggering always on Trace 1)
S
Pretriggering and posttriggering possible
S
Measuring signal display
S
Fixed Y-scaling selectable for each trace
S
Marker function selectable for each trace
S
Expand function in the time axis
S
Selective loading and saving of the measurement parameters and traces.
 Siemens AG, 2003. All rights reserved
SINUMERIK 840Di Manual (HBI) – 06.03 Edition
06.03